2005 Dodge Caravan "oil pan bolt stripped removal" Questions

...oil pan Then silver braze a nut inside ,to match the drain plug thread,once you remove the plug If you take a straight blade screwdriver and try to get it into where gasket meets pan (below oil plug) ...

oil pan for landrover td5? Why do you need to strip out the diff for an oil pan? The pan is bolted to the engine block and may only be blocked by the Front Axle. Try this website. Repair Guides Engine

...oil pan is really tight and I was curious if this bolt should go to the right or left? The head is already stripped. What is an easy way to get the bolt off after it has been stripped? Goes LEFT. ...

...oil pan 2010 ford fusion 2.5 engine Can't get oil plug out? Any outer stuff has to be done If your only having a problem with the plug have a machinist work on it, he can remove your stripped bolt by ...

...oil pan,,,proper socket and drive to fit the bolts around circumference of pan.scraper and new oil or catch pan to save old oil, approx 5 qts . 1/ Begin by draining oil....drain plug on lower part of ...

oil pan Depending on the vehicle, you may or may not be able to remove the pan with the engine in the car. You should be able to tell by crawling underneath. Always use proper jack stands when working

Oil pan replacement What is involved in replacing the oil pan? Can it be easily removed? Or do I need to remove engine mounts and lift the engine? No! Find the pan and remove all bolts holding it on. ...

...oil pan and lug nut. Read that a self-tapping oil plug might be the solution. What do you recommend? That is a judgement call on your part. The self tapping bolt will put a small amount of metal ...

...oil pan. It will have a bolt that screws into it. Remove that bolt after placing a catch pan under it. Once it is done draining replace the bolt. It should tight but do not try to kill it or you will ...

...oil pan plug. I was wondering if you knew how I could get the plug out now. You can us a channellock pliers or vicegrips . Something with teeth to sink into the metal. There is also a socket ...