2008 Chrysler Town & Country "3rd" Questions

1st, 2nd, & 3rd shift fine but won't go into 4th. Shows code transmission control modulator and 3rd & 4th gear ratio incorrect shifts fine but won't go into 4th, shows codes for 3rd & 4th gear

...ice and then catching dry pavement. My RPMs don't fluctuate though. I seem to notice it in 2nd and 3rd gear the most. Its the begining of the ruins of the torque converter. Its stator is letting go ...

...to remove the starter from a Chrysler Town and Country 3.8 L. I have found 2 bolts but not the 3rd bolt that the Haynes manual says should be there. There is a 3rd bolt but it is much larger and ...

brake lights not working I have a 2000 Chrysler T&C brake lights(both) not working including the 3rd Center one when brakes are pressed. Fuses are good. Any Ideas? BRAKE LIGHT SWITCH LOCATED ABOVE THE

what does ob11 code P1739 indecate? no a chrysler town and country mini van? Problem in 3rd Clutch Pressure Switch Circuit http://www.autocodes.com/p1739.html

...a 1996 chrysler town & country Brake light switch can be checked with a test light. Since the 3rd brake light is not working That's probably the

...noise when its cold start? Your transmission is not shifting into overdrive, it is staying in 3rd gear. I have the same

what needs replacing when my blower motor only works in the 2nd and 3rd position on my 2005 Chrysler town and country? You would need to perform the diagnostics to pin down the cause. It could be the ...

2008 Town n Country rear air conditioning doesn't work The a/c does not come out the 2nd or 3rd row vents. The blower works fine. It just blows warm or hot air! Dealership no help at this point. It ...

1998 chrysler town &country brake lights dont work but the 3rd one does brake light problems- tail lights work-3rd brake light works but the 2 main ones dont bulbs are good fuses good do your dash