...input (VGA or HDMI) 3. Unplug/replug the video cable connections at both the monitor and computer...it could be just corrosion or dust. 4. Hook up the monitor to another computer that you know is ...
...video at all. Monitor says no input signal and then going to sleep. try a different input cable and check if this is a cable or some loose connection problem. that itself may get the problem solved ...
Question about Acer Computers & Internet
video input. Screw down the retaining screws if you're using DVI. Using a KVM Switch Step 1 Ensure both computers are turned off. Place the KVM switch on your desk where it is within convenient reach.
...Video will be detected as long as the Input on the LCD monitor is selected. Audio on the HDMI will only work if the HDMI driver is provided like on a desktop computer you will need to get the driver ...
Question about Hannspree Computers & Internet
...input check video cable . monitor says: no signal input check video cable Even though the computer is on. Sounds a bit bland but either the monitor has failed or the video card Only test is to plug ...
Question about Compaq Computers & Internet
...input - no siganl & then it goes to sleep Do you have multiple Video cards installed in your computer? Check the monitor on another computer to verify the Monitor works and so does the cable. If ...
...input? Make sure the cables are connected securely and that the computer is outputting video; it might just be a power saving feature. this usually means the monitor is not getting a signal i would ...
Question about NetTV Computers & Internet
...if they are set to antena or cable.check also the video input if they are functioning.if video input is working the problem is in your tuner section.check the connection of your cable to tv
...input menu. If that's not the problem double check the cable for bent pins also make sure if you have a video card with DUAL dvi outputs that your using the correct one.. as the other one might be ...
...input may be either analog or digital. When making a change, wait 5 to 10 seconds between toggling between the analog / digital selections to allow the monitor to sync the signal for proper display. ...
130 questions posted
Usually answered in minutes!
83 Questions
81 Questions
60 Questions
39 Questions
32 Questions