Nikon COOLPRINT Thermal Printer "samsung keeps jamming" Questions

...Samsung, ML - 1451N and it keeps jamming. We have removed the paper and all jams in the printer and it keeps happening and gobbling up the paper? Is there anything other than this we can try?Thanks ...

...samsung clx-3160fn and it keeps jamming. it jams at the back and the paper is there but everytime i remove the paper it jams back again at the same area. can you help me? check your toner cartridge ...

samsung clp-300 - my printer keeps saying there is a paper jam at the tray, but there is no jam. I have removed and returned the tray several times but it still says there is a jam even though there ...

...keeps jamming barely out of the tray. is there something i can do to have it go all the way through. I have a samsung clp-315 laser printer. Yes, you have to change the print properties on the ...

...samsung ml2150 which keeps saying paper jam 2 i can see no paper stuck anywhere any ideas please paulmcfc Inside the printer,there is a sensor which detects the paper.if something is still stuck in ...

...keeps jamming paper, and making a lot of noise My CLP300 keeps jamming paper, and makin a lot of noise. The status light goes red , and stays red. I have cleared all jammed paper, but still no luck ...

...samsung clx-6210fx which keeps coming up "reverse jam 1" i have checked paper tray, back cover and inside cover and no paper is jammed. each time i look, the printer prints out two pages, then comes ...

Jam but no jam Hi, Afer moving I installed my CLP-300 back, Status light keeps lighting red, Smartpanel say I have a jam at the exit rolls, what's weird is that there is no jam, no paper bits left or ...

...Samsung scx 4521 printer keeps getting paper jams every 20 prints it jams, is this a mechanical problem. is there a solution or is the trash the best solution? ithink it is a hard were pr oblem we ...

...Samsung CLP300 barely used now only feeds in 6cm then comes up paper jam, I remove the paper and reset but it keeps on doing it. However if after resetting the unit I go into properties and print a ...