...I got a faded quality. I followed all the steps recommended by Brother; I checked to be sure the toner saver was off; I manually set the toner quality darker; and I even contacted Brother
Question about Brother HL Office Equipment & Supplies
it is printing a faded page on the right hand side. we have already tried changing the toner cartridge. Faded prints even after replacing the toner cartridge could most likely be due to dust at the ...
...printed not a full **** of paper since I bought my HL 2140 new, but the print is starting to look a little faded. Someone told me I might need to take the toner cartridge out and shake it? Is that ...
...about one inch in. i just replaced the drum and cleaned the corona wire twice. please help The toner powder is not evenly distributed or it sticked together, A light shaking the toner cartridge ...
new toner, very weak hardly readable printing Try The printed pages have smudges or dots. How can I improve the print quality? How do I improve print quality? The printed pages are light or faded.
Question about Brother HL Office Equipment & Supplies
faded printing on right side of pages This is most likely caused by an unequal distribution of toner in the cartridge. If stored on its end, the toner tends to cake up on one side. Take the toner ...
Question about Brother HL Office Equipment & Supplies
...are gradually fading then it's likely just excess toner hitting the fuse drum. Try a few cleaning cycles/test prints and see if that makes it go away. If not, see if you can get a replacement
fading output I have a Brother HL 1240 that's printing with a faded vertical along the right side of the page. The rest of the page is fine, just the right side, about 1.5 inches from margin. New ...
when I print the left side is very faded. Try replacing the toner, if it is not a genuine HP toner it is very likely it is defective.
Question about Brother HL Office Equipment & Supplies
...should I check? reinstslll cartridge then reset If faded prints happen even after replacing the toner cartridge or if you current cartridge has enough toner, it is most likely be due to dust at ...
694 questions posted
Usually answered in minutes!
1,072 Questions
422 Questions
377 Questions
249 Questions
188 Questions