light, the lamp is shot. Try BULBMAN.COM for a new lamp. lamp faliure not warming up fast enough sorry lamps exxxxxpensive red light indicates lamp is expired. even though you get temporary light, the
...lamp won't light up. Remote doesn't work except for power-on/off and laser. On power-up, lamp lights for 5 seconds then shuts off and lamp LED indicator lights up red. After cool-down and shut-off, ...
...Lamp light is red. Counts down from 30 seconds then image displays for about 20 seconds. Ready light goes off, lamp light stays red, image disappears, fan speed increases. After about 30 seconds the ...
lamp light i have 545 hours of lamp life used but my lamp light is on...is this normal? That light is there to tell you that the lamp is close to the end of its useful life. It simple monitors the ...
...lamp light started to flash we purchased another lamp but that lamp will not come on and the lamp it self does not come on. if the lamp warning light is flashing, this indicates a defective ballast ...
Question about Panasonic Office Equipment & Supplies
...light is coming out of lamp, system shuts down, then you see red! how to determine: pull the lamp out of the unit's compartment. Inspect lamp: bloated stem? shuttered? reflector is not shiny? ...
Question about Panasonic Office Equipment & Supplies
...light. If LAMP INDICATOR light is illuminated RED than lamp runtime has reached 1800 hours. but projector still working. If LAMP INDICATOR light flashing RED than lamp circuit failure, or abnormal ...
lamp light indicator turns ON, but the 'Ready Light' does not come on. Pressing the power button does not turn the projector ON. The 'replace lamp' light is not ON so I dont know if the problem is the
...lamp. 3m-X50 projector: Lamp will not light up. Changed lamp. Turned on then power and lamp light flashes red while fan starts to run in high speed. you have a bad ballast. you'll have to replace
Question about Sharp Office Equipment & Supplies
...light, the lamp is not blown.-power light and lamp light both go red after it completes its cycle trying to start up. How many hours has the lamp been used. Have you had any messages before about ...
63 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
438 Questions
454 Questions