HP Laserjet 2605 Printer "hook cat 5 cable" Questions

...cat 5 or 6 )". To go directly to a printer from your computer with no routers, switchs, or networking you use a "cross-over cable". Be sure your computer and printer are still on the same IP-address ...

...hook it to a laptop undo the network so no can send a job to it set up laptop to print to it, so go to hp.com load driver then print then on the same page from hp download firmware and the installer ...

...Hook up a cat 5 cable from a network switch and load the driver on each workstation  You need to connect your printer through the network cable to your network switch or router, than you have to ...

...hook up 2 different computers (New Dell Optiplex 360 and 4 year old Dell Inspiron 6000 laptop) to one printer/scanner (HP 7310 All In One). You have a miriad of options available to you for ...

...connected computer. Alternatively, connect the un-www connected computer to the www - all you need is a cat 5 cable from the nic it probably has to your router. Thanks for your interest in ...

...CAT 5 but will not work for this purpose. Check to make sure you have a minimum CAT 5 network cable. Secondly I would check to make sure that you are connected to the correct port on the back of the ...

...cat hair and other crap out of it. Switch on and it tries to print the test page, then shuts off. I do NOT have a lot to print, rarely even. So the bottom feed can kiss my **s, I am content with the ...