Peavey AMPLIFIER, 1000 WPC, DDT, 8/4/2 OHMS => Model PV2000 Car Audio Amplifier "amp volume" Questions

...works when you lower volume but it doesnt work when you try to higher volume Are you talking about the Amp working in lower volumes or the cd player? If it is the amp do you have the speakers

amp volume down, clipping is not from tuning its from too small and amp then turning the volume too high or a very distorted signal, this then causes the amp to produce high levels of distortion which

amp sends power to sub at low volume. but when volume is increased speaker loses bass and distorts REALLY BAD. Still has power but clear bass disperses. just sounds terrible at even lower volumes are ...

volume the amp will go into protect mode and stay there untill i turn the volume back down then the amp comes out of protect mode. whats the problem with that. Subs make like a crackling noise too and

...amp cause this kind of erratic volume control? This is a beater pickup truck that I don't use alot so I am trying to avoid spending unnecessary money. thanks prolly buy a truck and a amp from this ...

...amp volume down abit it will solve the problem .. i had the same problem i tried to turn the volume down and everything become okay and if u can use the RCA cables from the cd player it have them it ...

...volume to compensate for road noise. -Your amp isn't receiving enough power. Try ggetting a new battery and alternator, if the amp isn't getting enough power when the motor isn't revved then the ...

...has power at all ties of it coulb be that the amp needs adjusting for low volume use to set up a sub you turn up the volume to the required level then adjust the amp acordingly hope this helps ...

volume levels. Actually I don't know exactly what your amp is, but this is just a guess, and it could be a plausible one as long as you can get sound without using the amp. If it is so, it must have a

...volume Amp cuts out when volume is increased. Seems to be getting worse can only get the dial to about 10 oclock before it starts cutting in and out. Check the impedance of the speakers vs the ...