Amana 3.2 cu. ft. Top-Load Washer "squeaks during agitation" Questions

...during agitation only Washer is 22 years old and just started making squeaking noises only while agitating. Everything else is fine with it. Any ideas what might be happening? The bearings in the ...

...during the agitation cycle may signify a problem with the motor. Specifically, the belt on the motor may be wearing out. Some motors use rubber couplers, which also wear out easily. The belt is ...

...SQUEAKS DURING AGITATION CYCLE. If you suspect the leak is from the main drum seal. To remove the agitator, remove the softener cap by pulling, look inside the agitator, undo the bolt (4) with long ...

...not during spin cycle. Help? very possible if squeaks in agitation top springs that hold tub needs greased under spring & plastic shield under spring. had same problem on big front loaders ...

MAV-3 top load washer makes loud squeaky noise during the wash cycle. Is it a constant squeak or does it go squeak-squeak - squeak as it agitates? It is a squeak that is intermittant then usually your

during agitation...drum seems to be 'sticking' .... the washer is cleaning clothes just fine. Just a very loud and annoying noise during the agitation period. I worry this will lead to bigger problems

...squeaks when it is moving slowly in the wash cycle. I saw you mentioned possibly missing wires from bras. Where are they and how do I remove them from the washer to stop the noise? THE 4 RODS HOLDING ...

...During the agitation cycle I hear a loud squeaking noise. It seems to come from the motion of the tub and not the agitator itself as I can trick the lid and move the tub by hand which causes further ...

...during agitation We've had this machine about 5 yrs, after about 2.5 years, the machine began a very annoying squeaking / creaking noise during agitation. It drives me crazy, so I am determined to ...

...during the agitation and spin cycle. Maybe a broken or loose bracket? Bad tranny? Bad coupler ? Any suggestion as to how to best diagnose and or repair? That sounds like a clutch problem - probably ...