Jenn-Air SVE47100 Slide-In Electric Kitchen Range "stove burners overheating" Questions

...stove just getting so old that repair isn't worth it? I've tried it with burners on and burners off and oven going and not going -- with same results. Thank you for your reply. The answer your ...

...stove. Another possible issue could be a malfunction in the control itself. The fact that the other burners need to be turned on before the faulty one will work suggests that there may be a problem ...

...stove when i turn on the burner on setting #2 it get very very hot over heating. what should i do to correct this problem. depends on type or range top you have. it is rather the switch is not ...

...stove burner is overheating. No matter what setting I turn it on, the heat goes to max. What part needs to be replaced? My range is model # FEF366CCE, serial# VF42032590. The front burners-not the ...

...burners work on stove but the oven wont work....any ideas?? The F1 error code is a failure of the electronic oven control. This could be caused by a stuck keypad or an internal malfunction of the ...

...ignitor started clicking on its own at a rate slower than a normal start. Supply power checks good. Stove will start normally. Tried unplugging but no change. I had that problem also. It seemed to me ...

...reset the clock, as if the power had gone out. The gas stove top burners still work. This sounds like safety cutout. It might be overheating. Make sure nothing is obstructing airflow around the

stove. I have a couple of problems. 1) while using the oven the top burner is also hot -- is this normal. there is also a strange odor like something burning. 2) Last night I used the range (still has

burners for cooking. Any ideas for a permanent fix? On the back of the stove are 2 blower fans just under the cooktop. They are cooling fans to keep the controls from overheating. They are a long tube

stove I was using all burners and the oven too and it shut off and will not come back on. Is there a reset button safety feature that would cause this. Hello Randy, thank you for your post! I see your