20 Most Recent
Jenn-Air SCE30600 Slide-In Electric Kitchen Range Questions & Answers
Clock not bright
We rebuild a lot of this part for the dim display problem. This will save you some money!
fixyourboard.com/boards/71001799.html
11/1/2021 12:03:42 PM •
Jenn-Air...
•
Answered
on Nov 01, 2021
How do I obtain and replace the C3 capacitor
C3 capacitor rated for 68 µF- 35 Volts the closest radial capacitor from RadioShack is P/N 272-1015 (47µF-40 Volts). Pay attention to the position of the "white arrow" on the capacitor when replace. A little patience, a soldering iron and less than $1.50. Your range will be as good as new.Bonne Chance!
10/26/2021 8:00:57 PM •
Jenn-Air...
•
Answered
on Oct 26, 2021
Stove controls beeping and flashing "Probe"
Most likely oven sensor / probe is the problem. It can be tested with an ohm meter. Not sure about your model, but most should read around 1100 ohms at room temperature. If there's a tech sheet somewhere on your unit, it should tell you.
9/23/2017 10:06:05 PM •
Jenn-Air...
•
Answered
on Sep 23, 2017
Jenn-Air oven shuts down after FC and F5 errors
Their was a good possibility that the solder could have been lifting of the contact points on the board, if the symptoms return i would check this, along with the said cleaning method :)
3/15/2014 10:50:08 PM •
Jenn-Air...
•
Answered
on Mar 15, 2014
Oven fan
you dont fix it its working fine, the fan comes on at a predetermined temp and doesnt shut off unit l cools to a certain temp as well , its to protect electrical components from overheating. every new stove does it has to happen!!
2/5/2012 2:52:38 PM •
Jenn-Air...
•
Answered
on Feb 05, 2012
Hello again a just posted
We went through all of your wiring and discovered a few loose connections which we tightened and tested. Thank you Ken for being such a great help. Remember WE Can make work, even if we have to invent or own test equipment as the 110 v bulb and socket wires:)
8/16/2011 8:22:38 PM •
Jenn-Air...
•
Answered
on Aug 16, 2011
Not finding what you are looking for?