...BACK OF THE DRYER REMOVE THE AIR DUCT FROM THE BACK USING A 1/4 IN SCREW DRIVER REMOVE THE ITHINK IS 10 OR LESS SCREWS FROM THE BACK PANEL, THE PANEL U ARE REMOVING IS THE LOWER PANEL OF THE DRYER ...
...back of my dryer off to check igniter etc. below the head panel on the back side should be about 7 or 8 screws, onthe back to remove the panel, after removing all the screws, remove the vent tube an ...
back of the dryer to check. i would like to get a service manual so i can check the element 1 Unplug the power cord from the electrical socket. 2 Remove the screws located around the edges of the back
...back of dryer top which go through an L shaped part into the back of the dryer. (the L shaped part remains attached to the dryer top) Push the dryer top back about 2 inches and lift off. Remove one ...
Dryer is not drying properly. My husband cant figure out how to remove the back panel to check the heating components. He removed the front panel and in that model the components and fuses are located
...back of dryer and pull top forward while holding dryer in place with knees. Do this to pop up top on front left then front right. Remove 2 screws holding front panel 2 side panels. They are at top ...
...dryer's back panel. Loop a piece of string behind the "Start" button and pull forward on the string to pop the knob off the switch's post. Access the interior of the control panel. Depending on your ...
...dryer( a few screws across the back of unit.) andthen disconnect the dryer belt(easiest acess through a small acess panel on lower rear of unit, pull the dryer drum out and youl see the existing ve, ...
removing back panel to check heat element. Is there a trick to removing panel??? the back of the dryer have about 16 sheet metal screws.remove all the screws with a nut driver.the back should come off
6 questions posted
Usually answered in minutes!
287 Questions
241 Questions
228 Questions
185 Questions
133 Questions