LG Tromm Front Load Washer And Dryer Set "removing broken pin pump" Questions

pin, or pump itself is seized, or impeller is broken or loose. Remove front panel, there are two clips in between front panel and top that you have to push in with metal putty blade or thin slot screw

...pump impeller and make sure there are no missing or broken blades and that the impeller spins freely. If any blades are broken/missing or if you cannot get the impeller to spin freely, the pump is ...

...broken blades and that the pump impeller spins freely. Hard objects can damage the blades on the impeller. If any blades are broken/missing or if you cannot get the impeller to spin freely, the pump ...

...pump that has broken or blocked. Filter has been cleaned. It sounds like you need to check out the pump. Remove the hoses from the pump and use a flashlight to look into the suction port on the pump ...

...broken off of the pump motor shaft and will need to be replaced. If you cannot hear the pump running, and can hear a slight humming noise, then there is something jammed in the pump. The pump can be ...

pin, or pump itself is seized, or impeller is broken or loose. Remove front panel, there are two clips in between front panel and top that you have to push in with metal putty blade or thin slot screw

...agitate I took the pump off & the coupler is broken. But I still cannot turn the agitator by hand. What might that be?? remove the agitator to see if there is a coin or bobby pin wedged

...pin on the door is not pushing it down far enough to activate it. If your washer spins but doesn't pump the water out, the drain line is probably clogged. In many washers, a small sock or other ...

...broken. To change it remove 2 pump clips and move pump out of the way. Then remove 2 motor clips and drop motor down. you then can change the coupler and put back together. You will need to line up ...

...pump impeller. Make sure no blades are missing/broken and that the impeller spins freely. If you find any broken/missing blades or if you can't get the impeller to spin freely, the pump is defective. ...