Question about Brother HL Office Equipment & Supplies
Paper tray not lifting the paper up for the initial paper feeder I have a Brother ML-5250DN printer. The mechanism in the paper tray that is designed to lift the paper at one so it can feed into the ...
Question about Brother HL Office Equipment & Supplies
...paper. What should i do? thanks. pull tray out load a couple sheets look underneath and see if paper is lifted up when closing paper drawer. If the paper is not raised to the up position you have ...
...paper tray. The gears that lift up the paper in the tray were stuck and would not rotate to lift up the paper in the tray. I just turned the gears by hand to loosen them and made sure the paper lift ...
Paper tray noise. Has nothing to do with toner cartridge. It appears to be the gears on the paper tray not meshing properly. Any thoughts? I actually fixed mine. I found this post and it did not fix ...
Question about Brother HL Office Equipment & Supplies
...paper tray or change the pick up rollers. I had the same problem and noticed that in the back of the tray it kept on adjusting meaning that when you have larger paper you adjust it to fit the paper ...
Question about Brother HL Office Equipment & Supplies
...tray the papers going properly but no impression mean no data printing on the paper. how can i solve this problem. please guide me. unistall the printer driver and reinstall it or cheak it,s ink ...
Question about Brother HL Office Equipment & Supplies
...paper lift tray. Check and make sure that your tray has all its levers in place Make sure the paper source is set up in default and not manual mode. This was happening to me and come to find out it ...
Question about Brother HL Office Equipment & Supplies
paper tray you'll notice a black arm hanging down in the middle of the printer...this should be up inside (the cause is too much paper being put in the tray then when the user tries to remove the tray
Question about Brother HL Office Equipment & Supplies
...paper tray on a Brother HL-5240? Yes, the guide at the rear for paper length needs to be set right at the arrow leaving 1/8 inch free space, also if the tray has gears on the side to lift the paper ...
Question about Brother HL Office Equipment & Supplies
...paper from tray loud clicking noise coming from paper tray on dislplay it says no paper Remove main tray. Check adjustable paper back stop. If the backstop is set so that the paper sit too tightly in ...
111 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
249 Questions