Question about GE Washing Machines
cycle, ie. spin, drain, rinse... sounds like the agitater drive is stripped its a plastic piece under tha agitater you just grab the agitater work your fingers under the edges and **** up on it and it
...cycle Ge has stabilizer rubber straps at top of outer tub remove front of washer remove 2 1/4 screws to remove top 5/16 screws hold 4 corners of top rim and 1/4 in scews under top frame replace all ...
Question about GE Washing Machines
GE profile washing machine won't agitate it spins out, drains, The machine rinses, drains and spins but does not agitate the clothes Pull the agitator out and check the drive collar splines.If you ...
...16, 2012 - 9 posts - ?2 authors hello, my kenmore washer doesn't complete the final spin cycle. i ... Does it stop in the middle of the final spin cycle or does it not go into the ... FIXED Kenmore ...
...cycle sounds like a jet engine. It sounds like there may be something underneath the center plate. Is this plate removable. It seems to be working fine, but the center plate is not rotation. I have ...
...cycle or spin. Basically the drum is not working. your agitator coupling underneath the agitator is stripped out,you need to remove the dispenser on top of the agitator then theres a 7/16" bolt down ...
Question about GE Washing Machines
cycle. It does drain and spin, so it does move throught the cycles. I had the same problem. Take the agitator off by pulling on it extremely hard - use allen wrenches in the slots on the sides to help
Question about General Electric Washing Machines
...cycle. screw is there, can't get to it without taking it apart. Don't know how to take the agitator aprt. simply reach under the base of the whole agitator and pull upward,it may take ...
...cycle, and not just a little bit horribly where it moves and hits the wall and the dryer, the legs are even and we ran it with out cloths in it and it didn't do it, why does this happen, can there be ...
16 years old. The only problem it has is in the middle of a wash or rinse cycle, it just stops. It doesn't do this all the time, but when it does I have to keep stop-starting it about every 5 minutes.
173 questions posted
Usually answered in minutes!
44 Questions
40 Questions
24 Questions
26 Questions
