Toshiba e-Studio65 Copier "finisher service" Questions

finisher is out of service, what should I do? Shut the machine off, unplug the finisher from the copier, then plug it back in. Make sure the finisher is securely attached to the machine, then turn the

...service finisher comm - how to fix the issue The 980.03 communications error on Lexmark X945e indicates a communication problem with the Finisher Controller Card. This usually requires a service call ...

...finisher you have ? finisher and stapler adjustment is done under service menu. chooce utility, details from laft and stop-0-0-stop-0-1. there is a finisher option. where you can adjust staple ...

...Is these hapend on installation of new finisher or it worked before? Check that wright slot for connection is connected. If you want service manual for finisher send me mail on ...

...service code F1-70 F1-70 is communication trouble between the machine and the sorter finisher. Check the cables connecting the copier and the finisher and power off and on machine. Should clear the ...

finisher is out of service The display information says: "the finisher is out of service". number of That is probably the fuser, a high temperature roller that fuses the toner to the paper. The heater

..., you do this by pressing menu buttom, and change the output paper to the internal finisher. Let me know wat happen after. You need to run sim 906 in service mode to reset the disabled

...Service. The C570 is a communication error between the finisher and the main unit. Check to make sure the connector from the finisher to the copier is plugged in properly. You could try re-seating ...

...Hello, the e575 is error related to finisher fault in HP sensor or in motor or in main pcb of the finisher. Usually the problem is in finisher pcb and the pcb needs to be replaced. Call

...finisher. Turn the machine off then back on again. If the code returns you will need to contact a service company as there is a drive problem in the finisher. Good Luck and Thank You for using