LG WM2487H Front Load Washer "not power" Questions

...not power up, then it means its having a power problem. it might have worked fine in the past, but that's electronics for you. Power surge, irregular power supply, excess power supply, etc can affect ...

...power button will not operate at all. If I open the door and manually spin the drum with my hand, the machine will power up, just as if I pushed the power button. It will then wash your load without ...

...not power back on. Have unplugged for several hours, still no good. Looked at solutions posted on this site and it appears my PCB board may be bad as I checked getting 120V coming in but no LED light ...

...power 3 year old LG washer WM2277hwWill not start, no LED message or anything. Machine was powered, but just "blinked" and shut off all together. Checked power supply, power is being supplied. Pulled ...

...not power on i have power all the way to the power button and when i hold the button down have power on back side of the circuit board and the fuse on the back block only has power going thru it when ...

...power source, reset breakers etc. washer will not turn on at all. you have to check there power supply cable...and power on button..step down transformer on the pcb....7805 and 7812 power regulater ...

not power up when the power button is pressed. There is power (120 v) to the switch, but I get no lights or any activity when the power button is pushed. Check your outlet to make sure there is power.

...power supply board(not the one with buttons). Look for burn or damaged wires. no luck with that, will probably need power board(usually the board that goes out). Call LG and speak to cust ...

...back in then works perfect for one cycle and does the same WM3470HVA model 207KWXD0K562 serial You mean pushing the power button will not power unit back on? You might need to replace the power ...

...not light up. Is this the power board, the rear power supply board, or something else. THanks. Hello. If the lid switch is defective, your washer may not function at all. The switch is inside the ...