Canon PIXMA MP530 All-In-One InkJet Printer "printhead stuck" Questions

...stuck on the right there's not much you can do, When the printhead goes bad it keeps your printer from powering up. You need to either remove the printhead, or unplug the light color ribbon cables ...

...printhead will come out of the right side, you will need to check for paper scraps caught in there, If stuck on the right you will need a shop to check it out for you so you don't break anything. You ...

...and paper and turned printer off and back on. probably your printhead is stuck with ink,if you dont know how to take the printhead out and wash it. go and buy a new printhead that will do ...

be saved?! thanks! In the shop we would take out the printhead and see if it powers up. If it does, the printhead is bad. If it's stuck on the right the only way to remove is to take apart the printer

...Stuck in the center position as for the cartridge replacement. can move it easily by hand. sounds like you need a new printhead, QY6-0054-000. runs around $50.00. When it says replace cartridge it's ...

assembly on the right where the printhead parks, is stuck or jammed. Look to the right with a flashlight when the printhead is out of the way and look for paper scraps, or anything that doesn't belong

...stuck there. Or your printhead carriage is stuck or not moving properly. Try this: 1. Turn on your printer and let the cartridges center in the middle. 2. Remove the cartridges and the printhead. 3. ...

...the printhead parks. Check for any paper scraps in that area, if the printhead is stuck on the right and doesn't come out, you shouldn't force it, just take it to a shop before you cause more

WRONG CARTRIDGE and Printhead does not move MP780 I have a wrong cartridge error. However, I cannot access the printhead since it does not move when I open the cover. The printhead remains stucked in ...

...is actually wrong. If the carriage is not stuck in the right corner, try removing the printhead. If it powers up with the printhead removed, you need a new printhead. The new printhead is around ...