Question about Lexmark E Office Equipment & Supplies
How can I restore factory setting in Lexmark E332n laser printer? I think i messed up when i tried to configure a new ip adress in the menu config and i removed the DHCP option! turn off the printer ...
Question about Lexmark E Office Equipment & Supplies
I have chnaged the photoconducter but still comes up with error message, how do i clear this? Hello, follow this steps: 1. Turn the printer off 2. Whilestill off, press and hold SELECT and RETURN ...
Question about Lexmark E Office Equipment & Supplies
Lexmark E340 printer gave error " Replace Fotoconductor" I replaced the fotoconductor, but it still gives the same error Reset Procedure(s) after putting in new Photoconductor kit Resetting the ...
my lexmark printer gives me an error '' 84 Replace photoconductor'', I replaced ink cartridge then turned it off, restarted and still the same errow please help. Thank You With most all lexmark ...
Question about Lexmark E Office Equipment & Supplies
Resetting Lexmark E340 after replacing photoconductor kit I have replaced the photoconductor kit, but cannot reset the printer. The box did not include paper with directions to reset. Reset ...
Question about Lexmark E Office Equipment & Supplies
Hi! When I turn on this printer after installation all the lights in the front panel is blinking when I turn it on. Please help you must to replace the laser
When you turn it on there's NO SOUNDS and all the lights are RED. Have turned OFF/ON and UNPLUGGED/PLUGGED BACK IN. No change. This problem may be caused by the printers' system board. I ...
...replace the photoconductor unit. 2. Reset the page count. • Press and hold Select and Return while turning the printer on. • Release the button when Performing Self Test displays. • Select Reset ...
Question about Lexmark E Office Equipment & Supplies
how do you get into the diagnostic mode For CS310 models, turn the printer on, press and hold Down and Right, and release the buttons when the installed memory and processor speed displays. For CS410 ...
Question about Lexmark E Office Equipment & Supplies
all lights are flashing. Tried turning the printer off. tried resetting. Checked that the doors are closed, cartridge in all the way. Hi, Try resetting the printer to factory Defaults. First turn off ...
63 questions posted
Usually answered in minutes!
224 Questions
171 Questions
106 Questions
83 Questions
56 Questions