Question about Xerox Phaser Office Equipment & Supplies
...Ink Smears, Oil Spots, or Random Ink Streaks Problem type Solution Ink smears on the front, back, or edges of a page. Select the automated procedure Remove Print Smears from the Control Panel. Check ...
Question about Xerox Phaser Office Equipment & Supplies
...Smears, and then press the OK button. The printer cleans the ink from the rollers by running several sheets of paper through the printer. Repeat Step 2 up to three times if the smears continue to ...
...smears) several times and nothing is working! I have cleaned out the trays of ink waste and it is still smudging the print. How do I fix it? Quite possibly, your Wave Amp board has failed. If so, it ...
Question about Xerox Phaser Office Equipment & Supplies
...ink inside the preheater assembly. Run "Remove Print Smears" to clean this out. check your maintenance kit & you eliminate the probleme by enter to menu in the machine and look for a maintenance ...
Question about Xerox Phaser Office Equipment & Supplies
paper jams at front feed. noisy when starting. grinding noise could have spilled ink on a move as it only cooled for 10 minutes. Run remove ink smears. Clean pick an feed rollers with packing tape.
Question about Xerox Phaser Office Equipment & Supplies
...ink!!! If you remove the right side cover, locate the drum shaft about midway back and midway up. There is an encoder on the end of that shaft. Remove it and clean it with some alcohol. Don't be ...
Question about Xerox Phaser Office Equipment & Supplies
...ink seems to smear or drag down the page. This is worse at startup but continues through the print job. Replaced the maintenance kit a month ago. Thanks for any help. What normally causes that ...
Question about Xerox Phaser Office Equipment & Supplies
smears the print on to fresh documents. How do I clean the drum? You don't clean the drum. You either need to replace your maintenance kit , or my better guess is your using generic ink sticks and you
...ink on the drum smears because it's too hot. Dirt (wax and oil)under the sensor probe prevents contact with the drum, and makes the printer think the drum is too cold. What is happening is that the ...
smears modes the machine removes all the ink from the print head, turns on a compressor and blows out the jets on the print head. There really isn't a "cleaning " procedure as with a laser printer. If
548 questions posted
Usually answered in minutes!
284 Questions
262 Questions
152 Questions
147 Questions
158 Questions
