Samsung CLP 300 Laser Printer "tab wont turn" Questions

...wont close...just had this problem.... Look at the back of the printer and you will see a rod with two black pieces on it...it looks like the fins on the door will mesh with these pieces and ...

...wont print Hello, The toner light being on solid means that the toner cartridge is empty. You will need to replace it with a new one. When replacing the cartridge, please remember to seperate the ...

...wont let the internet connect. check resources you use for Network adapter (or modem if Dial Up Net used) and printer. Control Panel/System/HW/device manager select the device to check: Properties / ...

wont stop printing .... Have tried unplugging power and usb. turned off computer. turned off printer. run out of ideas. has happened before but cant remeber how i solved it! You need to view the print

...wont print. when i go into maintenence tab it says bj cartridges not recognised cant do head allign or anything anyone slse had this problem Could have a corrupt driver. Disconnect the printer or at ...

...wont stop. I have the printer turned off right now, and could you people just give me simple to follow, step by step instruction because I know nothing about computers. ok, on your keyboard. press ...

...wont scan. photos are turning out blue in colour I had exactly the same problem: go to device manager(rightclick my computer and select properties,click hardware tab) and see if you have unknown ...

...tab at the back of the tray may be broken or completely snapped off. The sensor may need to be replaced. Ihave had 4 ea of the 1600n and had the same trouble w two of the four. Easily remedied. Any ...

...wont go on I used printer and when I wanted to make another copy it said I was low in paper. I added more and it said paper was too narrow. I have always used the same paper . I adjusted the tabs and ...

...wont stop in changing position this one is a brute force but effective solution 1. turn off your printer. 2. when the printer is completely OFF 3. turn it on. 4.immediately after the initialitiation, ...