Status Light Status light is solid red and printer will not do anything. make sure that you have paper loaded, all toner cartirages are pushed in fully, make sure waste toner carterage is fully ...
Question about Samsung CLP Office Equipment & Supplies
clp-300 makes holes in the middle of the paper hi, i bought this printer yesterday and everytime i print a photo on a a4 paper, it makes in the middle of the paper 2 or 3 holes, like it burned the ...
Question about Samsung CLP Office Equipment & Supplies
Printer suddenly stuck while starting up I'm using a Samsung CLP- 300 printer. My printer stuck at start- up.I turned on the printer on, orange light was blinking (as usual) then green light goes ...
Question about Samsung CLP Office Equipment & Supplies
Have just connected Samsung CLP-310n (ethernet to router) and installed the software. However, when I want to print using the CLP-310n driver, it always prints to file rather than the printer. Any ...
Question about Samsung CLP Office Equipment & Supplies
grabs paper and prints partially, jams with edge sticking out. I have to open door to ink cartridges to get it to feed through and there's a crease in the paper. a few things to check: 1. are you ...
why is my samsung clp making a clicking noise? Is the printer making a clicking sound when it is printing? Or is it just making a clicking sound but there are no light and the printer appears to be ...
Question about Samsung CLP Office Equipment & Supplies
My Samsung 3160 does not print uniformly across the page. It prints good, except for about 1" going down the left side is very light or faded looking. try to remove toner cartridge and shake, plug in ...
CLP-300 I have original ´colour-tanks´in my CLP-300/ELS printer. They are no counter-chips on these tanks...so the counters must be in side the printer... How can i reset these counters, so the ...
Question about Samsung CLP Office Equipment & Supplies
samsung clp 315 - it will print but makes a grinding noise, does anyone know what checks I can make? at the back of the fuser. there is agear you need to replace
1,096 questions posted
Usually answered in minutes!
374 Questions
221 Questions
108 Questions
110 Questions
74 Questions