...side of the screen. You need to replace the light tunnel.you will need to remove the lamp and color wheel along with the lamp housing and fan housing to replace it .If you are not comfortable taking ...
side panel or tv remote. Have to unplug to get it turned back on. It could be that a cooling fan is not operating correctly, allowing the unit to over heat, or the power supply board could be failing.
Question about LG Televison & Video
side of the lamp. It secures the lamp in place. Remove the screw completely. Now pull the handle firmly and voila! The lamp will slide out. To install new lamp just reverse the process. NOTE!!! Do not
...Remove the speaker grill on the front of the tv by pulling it outward evenly, so not to break it. While looking at the front of the tv, there will be a compartment on the right side. You unscrew 1 ...
remove the back cover of a rear projection 56 in tv to replace the lamp? There is a small door usually on one side or the other in the back with a small screw holding it on. Other models you must pull
...remove the volume control from the screen? Temporarly, I was able to raise the volume but I would go back down to 0 on it's own? Most of the time one of the switches under the control buttons are bad ...
...side of front) and then a green (under yellow flashing light) and it won't bring up the picture....HELP!!!! You should have checked the troubleshooting section of your manual!! Okay, enough scolding. ...
...side. I lost the Samsung remote so I can't access its settings. I really don't want to get a new TV or have to pay to get it fixed. Please help!!! Well, it has a bad T-con board. You'll have to pay ...
...Remove the four screws holding the projection box in place and slide the projection box out. It will not come all the way out but will slide out like a drawer. Disconnect the electrical wires at the ...
95 questions posted
Usually answered in minutes!
1,031 Questions
445 Questions
373 Questions
357 Questions
327 Questions