HP LaserJet P2015 Printer "2 tray wont open" Questions

...tray 2. Print a configuration page from the menu. Look at the tray set-ups. Sounds like you have tray 1 set to casette. Change it to "first" and the size to "any". The printer will then pull paper ...

error code 10-2 on a laserjet4100 wont print says tray 2 is open when its not try another paper tray.

...using manual feed if you are able to print fine using manual feed that check pickup roller of Tray 2. First of try to print using Manual feed and let me know if it is printing from Manual feed or

...2 new cyan cartridges with no change it will see the cyan cartridges and report on there level but not print any cyan. i recently swaped the cyan laser assembly with the magenta one and no change it ...

...2 full. wheres the bottle? next to first cassette tray left side of it. pull cassette out then pull on left side cover were tray was. There is a screw that has to be remove if it wont open on top ...

pointing to the MPF paper feed, if it is then you can either change the settings to point in the direction of tray one or tray 2. If its not, then you have to open the front and single feed the paper.

...tray came off my rx 500, I then found a 2" spring just sitting in that paper feed area? Dont know where to re fit it, can you help? You must open case first, dismantle paper feeder, and refit it. For ...

...tray is pushed down too far and 2 flimsy stop tangs on the backside of the tray hinge break off. The one on the left side contacts a microswitch, pushing it forward , signaling the printer tray is ...

2" I can not receive faxes because of this issue. I have opened all of the doors and cleared all paper jams. I also filled both paper trays but the error wont clear. Can you hear the cassette tray POP

...tray 2 not available, reset software and hardware but wont print from tray 2, paper size 11x17, any ideas Take the paper tray out as follows: open the front door, pull the tray out as far as it goes. ...