GE PFS22SBSSS Stainless Steel French Door Refrigerator "disapeer" Questions

...start to make ice , I add more refrigerant thinking that is becouse of low in freon , and the ice disapeer , but when the unit stop after the cicle finished , when start again compressor soud like ...

Not cooling enough. Check the condenser grill on the bottom of your refrigerator. If that is dirty, the unit can't disapate the heat properly and then the unit will not cool very well.

refrigerator not cooling but freezes freezer working fine but the refridgerator not cooling You might try vaccuuming under the frig to clean the coils so it could disapate the heat more. This could ...

refrigerator is warm If the fresh food side is warm but the freezer side is cold, check for ice build up around the evaporator coil which would mean that you defrost circuit is not working.If you are ...

My MayTag refrigerator don't work, but it is on Maximum. The freezer works, and everything works, also the little fan in the freezer,it also works. I need any assitance for problem. Check all coils ...

The strip between freezer and fridge is very hot The strip of metal between the freezer and fridge on my whirlpool side by side is very hot. Also, the freezer isnt keeping things frozen and the fridge

GE TFXB27 FRB BK model refrigerator is not cooling( both FR and FF), What do need to do or check what is wrong with it. GE mechanic came and nothing was done except door adjustment and problem remain ...

top fan is blowing and freezer or bottom fridge is not getting very cold Since neither is getting cold enough, I would start by cleaning the condenser grill under you unit and making sure you have ...

Ice maker and water dispenser When you push the tab to get water, no water comes out, until you push it a couple of times, and then hold it down. After 20 seconds or so, water comes out. The water ...

Overheating Our Kenmore refrigerator gets very hot in the divider and around the outside edge of the top freezer. So hot that you can't keep your hand on it! I've vacuumed and made sure connections ...