Question about Kenmore Washing Machines
...interface control board and the machine control board. The F2 error code on this washer indicates a stuck button on the user interface control board. The procedure for accessing the control boards on ...
board to the Right Hand Interface from (Pin 1 to Pin 2) and from (Pin 1 to Pin 3). 4). IF you do not have the 5 VDC then remove the MI3 connector from the Machine Control board. IF the display lights;
interface board inside the control panel to resolve this issue. The board is located directly behind the control knob. You can usually order the part at any of the following websites: searspartsdirect
...interface control board and the machine control board. The F2 error code on this washer indicates a stuck button on the user interface control board. The procedure for accessing the control boards on ...
interface board inside the control panel to resolve this issue. The board is located directly behind the control knob. You can usually order the part at any of the following websites: searspartsdirect
...interface control board. You can pull the washer out and remove the 3 screws coming in from the back of the top panel. Next, the top panel will pull straight back, up, and off. Now check all the wire ...
...board. Thios is what the tech sheet says Possible Causes/Procedure 1. Check for continuity of the User Interface harness. 2. Check wire harness connections to the User Interface and the Central ...
interface board on the right hand side of the console. The main top can be taken off by removing the screws along the back edge of the top. NOTE: Disconnect the power cord from the power source before
...board & interface. You'll need to use a multimeter to check for the continuity between the Keypad and the control board. Inspect the wiring between the boards. Also check for any burnt component ...
1,203 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions
