HP Pavilion a1410n (ER890AA) PC Desktop "connect laptop monitor tower" Questions

laptop to the monitor and it worked. I checked the cables and they seemed fine. There is a small yellow light on the front of the “tower” below the start button that lite up. (Never noticed it before)

laptop onto this computer (and there was still about 300 gb free). Then, all of a sudden, it won't start up. I turn it on, and the monitor stays blank. I have an HDMI connection to a Hannspree

...connect the monitor to my laptop, but do not get a picture, it just lights up (although it does not automatically go into sleep mode). After reading, it seems that the video card may need replaced? ...

...monitor? If it's a laptop screen, you'll probably have to buy a replacement. If it's a monitor, make sure the power cord is plugged into the wall and the back of the monitor itself, and that the ...

monitor or keyboard. About 2 months ago, my computer started to have difficulties turning on. I had to manually turn on&off from the tower and also unplug/replug it back in from the wall outlet. I

being a VGA type, the other being a digital type. Look these up on Google, images, to find which type you have. If it is a laptop, there may be a connection for an external monitor, usually a VGA plug

...connect the cable to other device(laptop) to see if is working,because if you receive the message"No signal" then the monitor is working but the cable/signal did not cross to the monitor,then is ...

...Laptop using a VGA monitor cable, and seeing if it does the same thing. Gary Gary Reeds solution above is good. Plus if you have a different monitor in the house, try that just to see if it's really ...

laptop it works like a charm. the only thing i have done on the inside of the computer case was just clean out the dust and that is it. Please help this is my favorite computer and it still works good

...laptop. If beeping; continue step 3; 6 insert the memory. 7. start the system 8. If display, connect the harddrive. in step 5: if not beeping: Either board or processor is dead. IN step 8. 9. start ...