Question about HP DeskJet Office Equipment & Supplies
...plastic strip has come off of something and now the ink cartridges go back and forth really hard but doesn't print anything. There are little slits on each end of the strip. One end is ripped so I ...
...ribbon that spans from one end to the other behind the carriage has come off its bracket. How do I reattach it and where? plastic ribbon is "encoder strip" encoder strip fitted in carriage block ...
Question about HP DeskJet Office Equipment & Supplies
...plastic strip ( about 7 inches long and 2/16th imch wide) had been detached. That's it! The pulley and print cradle mechanism seem ok. I don't see how this narrow platic strip would matter. Help! ...
Question about HP DeskJet Office Equipment & Supplies
...plastic strip behind the ink cartridges is folded over and the ink cartridges sit about 1/3 of the way from the far right where they should go when lid is down. I am assuming something BROKE but not ...
HP Deskjet D4160 green light blinks, can't be turned off. Printer does not print. Ink cartridges are fine. clean the timing strip. it the plastic strip w a very fine horizontal lines
Question about HP DeskJet Office Equipment & Supplies
...of the text has an absence of ink in a line through the middle of the text. Clean print heads and encoder strip (clear plastic strip behind print head) with alcohol free window cleaner and some q ...
Question about HP DeskJet Office Equipment & Supplies
plastic strip behind the print head. Very gently wipe the ink residue from the strip using a cloth damp with water. You should be able to move the print head manually enough to clean the entire strip.
Question about HP DeskJet Office Equipment & Supplies
...strip of clear plastic running the length of the printer from one side to the other - this is the encoder strip. In a good light, check this for dirt, marks and blemishes. Remove any you find with ...
Question about HP DeskJet Office Equipment & Supplies
...jet printers is the encoder strip gets dirt or ink on it. It is a plastic strip that has vertical lines all across it. The strip goes from one side to the other. You can clean it with an alcohol
plastic strip above the printer head thin plastic strip located behind the printer head just about the belt fell off and need to know how to put it back in IT IS EASY TO PUT IT BACK AGAIN. HOOKS WILL ...
136 questions posted
Usually answered in minutes!
2,162 Questions
707 Questions
530 Questions
316 Questions
318 Questions
