Panasonic TH-50PHD8UK 50 in. Plasma Television "component video" Questions

...component video inputs from Panasonic TH-42PX75U. Two years old. PIcture is grainy and has red tint on component video inputs from DVD. Three different DVD players have same result. Both component ...

...video component 1 input using either the TV/video control on the set or an automator universal remote, I cannot access video component 1 or 2 (they are grey on the screen), just the cable, TV or DVD ...

...component video connection jacks on the back nor does it seem to have regular video input jacks (the place of the jacks are there but no jacks). Is this normal? If so, how can I get this display unit ...

component and S-video connections for future add-ons. You can find them all over the web, or your local video store like walmart and best buy. Here is a switch i found on ebay that should work: http:/

...Yellow white and red then it would go into the video input and put your TV in Video mode., If you have Blue red and green, it is use for component input, and you put your TV in component

...a red screen on my main component video input when watching tv. While others, like Video 2, etc., work fine? Please make sure that all the wires and cables are in the correct slots on your

...component video cable, I'm not surprised. The VGA to component video cable is for projecters with component RGB jacks. The TV use Pr,Y,Pb instead. So the TV can't read the computer's signal directly. ...

...component video inputs. With a desktop PC, you can still use one of those two options. In addition, there may be a DVI video output connector available as well. This is not common on computers with ...

component /composite video terminal Board that mounts to slots 1 & 2, or slots 2 & 3. The item number for this component is TY-42TM6Y and can be purchased through the Panasonic support website

component video cables? If so, check that these aren't loose on either end. Next I'd consider that whatever video cable/input might be bad, and switch cable or cable type... i.e. switch from component