...lid is open. If it really isn't, then the problem is with the switch that sense whether the lid is shut or not. Could be bad switch or bad connection. OP means lid open be sure lid is closed . If it ...
lid open condition for three complete wash cycles. I suspect the left lid lock. I think you have a problem with the magnetic reed relay in the left lid lock. If you could try this? I want to make sure
Question about Maytag Neptune Washing Machines
...Lid is Open "OP" or "OD" when the Control Board does not see the lid open after three completed cycles. Do you think the lid is warped and the Lid lock latches can't seat into the notches in the lid? ...
...open up the left lid lock and see if corrosion is the issue. The plastic latchs around the lid lock enclosure can break off very easily be careful when opening the lid lock. If you have severe ...
Question about Maytag Neptune Washing Machines
LID is Open/Closed and LID is Locked that is important. Did you look at this at this post started by oak9952 ? It has some good info for removing the left lid lock I also attached a similar pic of the
...lid open for an hour or so. Now the machine keeps buzzing the "OP" error (lid open) even when it's not and the wash cycle will not begin. I unplugged the machine for a day in hopes it would reset it ...
...lid open signal from the left lid lock for three completed wash cycles. Could be corrosion issues with the left lid lock and or plug connecting to the left lid lock. If you pull the power plug on the ...
...open the lid. This was not the case for mine. I did open the top of washer and then disconect the two set of wires going to the lid closes. Then turn the power on and it will change to OP, Now turn ...
LID is Open/Closed and LID is Locked that is important. Did you look at this at this post started by oak9952 ? It has some good info for removing the left lid lock I also attached a similar pic of the
Question about Maytag Neptune Washing Machines
...lid open condition for three completed wash cycles. You can unplug the washer 120VAC power and plug back in and see if that will give you three more wash cycle before extending the OD alarm again. ...
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions