Question about Maytag Neptune Washing Machines
...water starts to drain and then stops. drum never moves. How do I troubleshoot this? I have read about error codes but where do I find these? My unit is a MAH3000WW Series 31 with no display. Help! my ...
Question about Maytag Neptune Washing Machines
...water in there when I turn drum by hand.) Hello, The earlier Maytag Neptune front loaders have a balance ring on the inner tub that has liquid in it and that causes the sloshing sound when you turn ...
...MAH3000 washing machine. a few months ago, it had smoke inside drum area when the cycles finished (per wife, i could never verify). it soon started sounding like a jet engine. last weekend i replaced ...
water balance method to help spinning procedure. I called a Maytag repair shop and they helped with my question. Yes, it is called the balance ring and it does have liquid in it. You can hear it slosh
...MAH3000 Stops I just installed a Waxmotor Kit in our MAH3000AWW without success. Installed the Waxmotor and the Q6Transistor. The R-11 Resistor was not cooked it was exact same resistance value as ...
Question about Maytag Neptune Washing Machines
...water out everything else seems to work ok, but the clothes are sopping wet at the end of the cycle. My Maytag Neptune MAH5500B or MAH5500BWW wouldn't spin either. It would go all the way through the ...
Question about Maytag Neptune Washing Machines
...water valve. The MAH3000 has two flavors, the earlier model had (2) extra wax motors in the soap dispenser for the bleach and softener controls and the newer ones have the bleach and softener valves ...
Question about Maytag Neptune Washing Machines
...MAH3000 front load washer. The display would say "Suds" and wouldn't do anything for a long time. Once in awhile it would shoot out some water then sit there while saying "Suds" the whole time. Any ...
...water and f 21 keeps flashing I don't have a code book on this washer but sometimes they list some codes in owners manual. I think the code is drain problem..u will have to take the panel off locate ...
...MAH3000. It has had the replacements done by the recall. Twice now there has been a burning smell(months apart). Opened the back and checked the belt. Shows no sign of getting stuck..looking for a ...
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions