...filter screen inside the hose where it connects to the faucet clogged? Do you hear a buzzing sound when the washer is trying to fill and is set to COLD only? If all the above are OK then the ...
...faucet valve is just slightly opened and that the gizmo valve is closed. Using the gizmo is straight forward. First remove the drain filter and than insert the vinyl tubing in the end of the rubber ...
Question about Kenmore Washing Machines
...filter in it to keep the inlet water from passing particles that would keep the solenoid valve from closing completely. Shut off the water and take the hose off from both the faucet and the washer. ...
...filter/ trap clean it and put it back, the machine will run wonderfully again. you have to do this every couple of months Yes I have to agree with the previous posting. I had the same problem and the ...
Question about Maytag Neptune Washing Machines
...filter access port and caught the water in a heavy duty trask bag (which I emptied three times). I found 2 quarters, 2 dimes, 2 pennies and a button. I stuck my finger into the pump motor and found a ...
...filter located and need instructions to take apart to clean it out it is located behind the waher where both hoses meet you have to take them off at the back of the machine and it should be right at ...
in the fill valve, jamming it open a little. You can't always take them apart. Turn the water off at the faucet to check. Get new hoses, the filters in the old ones must be bad, and old hoses can blow
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions