Maytag Neptune MAH6500A Front Load Washer "control locked" Questions

...Locked? signaling to the control board. The easiest thing to do if you feel the machine is a keeper is to invest in the left lid lock and replace it and see if that gets you back in service. Again ...

...to control board the door is locked. 1.Check wire connections in harness leading from machine control board to door lock mechanism.2.Check solenoid and door lock enable switch in door lock

...locked but the control does not sense the door has locked. It could be caused by: faulty door lock solenoid loose wire connection faulty door lock switch faulty door lock sense switch bad control ...

...control board the door is locked. Solution Check the wire connections in harness leading from machine control board to door lock mechanism Check solenoid and door lock enable switch in door lock ...

locked" light comes on. If it does not, you need to replace the wax motor in the door lock assembly and the machine control board, which is inside the control panel. The control board is expensive, so

...Locked? input to the control board. From the schematic it looks to me that +12VDC signals the control board that the lid has successfully locked. So what is causing the Lock LED on the console? If ...

Wat is a control lock on a may tag Neptune Control lock prevents any functions on your control. ( this is like a child lock).

...control locked light will not turn off, I recommend unplugging the washer for 5 minutes. Plug the unit back in and see if the controls will respond. If not, You could have a failed control console or ...

...control board indicating the door is locked. Check connector P3(7)/YL 36 wire to verify if the terminal is making good contact to the board terminal. Check the door lock enable switch for continuity ...

...control board the door is locked. 1.Check wire connections in harness leading from machine control board to door lock mechanism. 2.Check solenoid and door lock enable switch in door lock mechanism. ...