...The laser Apeture is sticking. What i did to mine it Sorta hit it on the paper side and caused the shutter to start working if you take the toner and use a screwdriver to push down the shutter, it ...
...shutter out of position, and cause it to stay closed. i know, i did it once. never do that again. Try to reset the unit ...go on menu setup and ckeck for tuner level posibility Drum Damage Refer to ...
holds the toner in the toner box. If that is ok, then take the old cartridge and shake it from side to side a few times and re-install the old one back into the copier. Any change? If so then your new
printer around one time and then voila! It was running just fine. Laser Shutter that opens and closes when side door is closed and opened is sticking shut. Take covers off machine to expose laser unit
Question about Canon imageCLASS Office Equipment & Supplies
...shutter that covers the Laser Scanner unit and it was not moving. The covers job is to keep protect the scanner (mirror) while the toner cartridge is out of the printer. I had to take the sides off ...
Question about Canon imageCLASS Office Equipment & Supplies
...printer is closed. The shutter operation be checked and rectified. 2. Still if required "Power off" printer > Press & hold 'ENTER' > 'Power on'. continue to hold 'ENTER' key only till ...
...printer. On the ground is a small shutter, you have to pusch it to the rear side and hold it there. Under the shutter is the LSU. Now you can clean it with a non-fuzzing cloth. Hope i can help you. ...
...1) Shake the toner cartridge several times horizontally, and remove the tape. ? Do not hold the shutter lever when shaking. 2) Press the lock release lever, and insert the unit completely into
...shutter that holds the laser: carefully force this open with your hands and force the laser out into the center of the tracking cradle. After you move the laser, unplug the printer for a few minutes. ...
Question about Canon Office Equipment & Supplies
...drum unit. There is a flag on the left rear(when holding it by the handles)that actuates the laser shutter. if the flag is missing the shutter doesn't open there for you get an E100 error. Could be ...
205 questions posted
Usually answered in minutes!
352 Questions
238 Questions
127 Questions
125 Questions
139 Questions