Canon DR-1210C Scanner "guide" Questions

canon dr9080c wont scan to the guide plate width in ScanFile - Is this a sensor problem & where would the sensor be as there are many!! Remove the paper tray, remove the cables carefully. If you turn ...

...with alcohol. Check for any obstructions in the paper path like torn paper, heavy toner buildup on guide plates or the edges of the scanning glass, or any paper guides obviously loose or out of

...select scanners maximum. In the 'advanced' select auto detection. Then whatever size of the paper guides you choose, that will will be the width and ofcourse the length is automatic. There is a ...

Scanned image on left is cropped by a good quarter of an inch. Just used this scanner during last tax season, so it should not be having a problem! Love it, but this is a new issue. How to get the ...

I am getting a thick black lline on my scanned immages You need to adjust the position center of the scan materials.. The scanner pulls sheets fronm the center of the feeder. Using a single sample ...

...the scanned image while scanning itself. Also select 'Image only" radio button instead of 'Guide Plate'. The software will remove black borders around the image. S. Mohan, Chennai, ...

...to clear it. S. Mohan, Chennai, India most common causes are 1. dirt accumulated under upper guide plate     blow out all 6 holes under  (directly below black cover of

...you can select "Auto detection" for page size, and under 'more' select 'image size' instead of guide plate. Also you may have to select option '1' under user code U10 in case you want to scan ...

...installation in progress and it just sits there. I never get to the screen shown on the easy start guide that says Welcome in the upper left corner and the next button. Any suggestions? Uninstal all ...

...this. Any suggestions? Thank you in advance for your help. Is there a place to puchase a User's guide or owners manual for this scanner? That would be helpful too. The issue at hand here is a ...