Lexmark X7350 All-In-One Printer "turn off power" Questions

turn off the power save mode for this device? If so how do you do it. The power saver mode can not be turned off. This feature is designed for you to save energy on power consumption and reduce impact

lexmark x6170 random shut off while printing Lexmark X6170 all-in-one printer, randomly turns off in the middle of printing a page, may print several pages without any problems, then will shut off ...

a few minutes and after replugging, it worked fine. However, the problem returns after I power off the printer and then turn it back on, in which case I unplug again for a few minutes. Hope this helps

...turn off using the power button, unplug the power adapter from the printer. The power adapter is the rectangular black brick behind the printer where the power cord plugs is plugged in. Replug after ...

...turn off It could be that the printer is not getting enough power. Pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds. ...

My Lexmark x9350 only turns on and off if I plug and unplug... My x9350 only turns on and off if I plug and unplug it. Also my LCD screen is black and can't use the printer unless my computer is ...

...power. WAIT 1 minute, turn the Lexmark on. You should see "Found New Hardware", and maybe, "Found Lemark 3500/4500" If you have the USB cable from printer to computer plugged in FIRST, then install ...

lexmark poering out! I have a lexmark 4550 and it keeps powering out. I plug in the power box; it turns on for 5 seconds then turns itself off. I've tried the reset buttons etc. but it wont stay on ...

...not turn off. When I hit the power button, my x2500 will not turn off. Hello, power it off, otherwise disconnect from the main source, otherwise reconnect after 2 mins, power on and off this wiil do ...

...power outlet. Turn on the computer (first), turn on the printer. Go to; Control Panel, (Hardware and Sound), click Printer; if the Printer is present; click to open, Properties, click on the Driver ...