...pickup roller? If YES - follow this simple steps: Open front coverRemove toner cartridgeLook for two plastic pins (left and right side of the roller) on top.You have to use flat screwdriver to unlock ...
Question about Samsung ML Office Equipment & Supplies
...open the Samsung 2010 and slip the rubber band on the pickup mechanism. Advice? two screws when you ope front door,at the back 4 screws.the front where screws are they are 2 lugs holding cover wedge ...
...Open the front of the machine and remove the two screws that hold the top panel in place. Take note of how the sheet feeder sits in this assembly. The sheet feeder is not screwed in, but rather held ...
Question about Samsung ML Office Equipment & Supplies
...Open the front of the machine and remove the two screws that hold the top panel in place. Take note of how the sheet feeder sits in this assembly. The sheet feeder is not screwed in, but rather held ...
...pickup rubber is in place. I does not, however, catch the paper. I viewed what was going on by leaving the front cover open and fooling the printer it to think it was closed by holding the lever down ...
Question about Samsung ML Office Equipment & Supplies
Open the door and remove the print cartridge. Figure 2: Opening the door and removing the print cartridge Locate the pickup roller inside the printer. It is the large gray roller in the center, behind
Question about Samsung ML Office Equipment & Supplies
...pickup roller: CAUTION: Failure to complete this procedure might damage the printer. Unplug the power cord from the printer, and allow the printer to cool. Figure 1: Unplugging the power cord 2. Open ...
Question about Samsung ML Office Equipment & Supplies
...pickup roller (tray 1) Unplug the power cord from the printer, and allow the printer to cool. Press the print-cartridge-door button to open the print-cartridge door. Remove the print cartridge. After ...
Open the toner cartridge door, and remove the toner cartridge. 3. Locate the pickup roller. 4. Release the small, white tabs on each side of the pickup roller by pushing them away from the roller, and
...pickup roller. To check the roller simply open top cover and remove toner cartridge. Roller is D shaped and can easily be removed by gently pressing the two tabs outwards. This should pop out the ...
481 questions posted
Usually answered in minutes!
417 Questions
283 Questions
276 Questions
130 Questions
72 Questions
