Konica Minolta bizhub C250 All-In-One Laser Printer "paper feed printing" Questions

...paper tray or check the paper in the paper tray for folded over papers usually near the bottom. Also try feeding paper from the hand feed tray on the left side. This uses a different paper

...Paper Feed' 'Bypass Tray' then print Then select Bypass Tray on copier and paper weight then I print but it always ignores settings and finds nearest 'Normal' paper I've tried the above in every ...

paper feed and colour problems with Konica Minolta bizhub c250 feeds crooked from every tray so prints come out crooked, chronically prints with magenta stripe through colour prints (have had image ...

...error occurs I know this sounds silly but some try flipping the paper over, then try turning it 180 degrees. Printer paper has a grain (a direction that allows it to feed through the printer

...FEED TIRES WITH WD 40 THEN RUBBING ALCOHOL, MAKE SURE ITS DRY BEFORE FEEDING PAPER IF YOU HAVE A TRAY 5, ITS MORE RELIABLE IF STILL PROBLEM HAVE YOUR TECK USE THESE PARTS A03X565300 FEED AND TAKE UP ...

It's an extra-cost hardware option to "flip" the paper over, and feed it back into the printer, to allow printing on the "back" of the sheet. Buy the duplexing hardware, and connect it to your printer

...paper Noise is a relative thing. If it's bumping, clanking and sounds like it's tearing itself apart...That's a bad thing! If however it's resetting itself with the shuttle mogating back to its home ...

...Under printer setup select your print, then change the paper size in the settings to the paper you're using.Change the alignment of the paper feed on printer to the size of the new ...

KONICA BIZHUB C250 DOCUMENT FEEDER PRINTING ON ANGLE KONICA C250 DOCUMENT FEEDER PRINTING ON ANGLE Clean the feeder paper feed,separator roller with cloth and alcohol.

Mam Do the they print strait from tray 1. Check that the guides in draw two are snug up against the paper not loose