we have a konica C 250 Biz Hub and the last technical service company apparently put an...
(More)
we have a konica C 250 Biz Hub and the last technical service company apparently put an administrators code on it. it is TOTALLY useless without us getting into it. HOW do we over ride this code?
when I try to print multiple copies from a file on my computer, the bizhub spools between each copy...
(More)
when I try to print multiple copies from a file on my computer, the bizhub spools between each copy between printouts, how do I spool one page and have the copier print multiple copies?
I am trying to print a booklet with two pages front and back from publisher 2007 on a Konica Minolta...
(More)
I am trying to print a booklet with two pages front and back from publisher 2007 on a Konica Minolta Bizhub C250 and when I print one copy it folds and staples fine. When I print two or more copies the machine prints all the pages, then staples them all together and folds them. I've tried to print a bunch of different ways (with collate checked and unchecked) but it still happens. I need to print out a few hundred booklets and do not want to print them one at a time. Any ideas?
Could you simplify what you told me what to do, because i can't really understand it a whole lot....
(More)
Could you simplify what you told me what to do, because i can't really understand it a whole lot. BizHub C550
We are currently scanning a lot of historic documents through our C250. The scanner is configured to...
(More)
We are currently scanning a lot of historic documents through our C250. The scanner is configured to output a PDF onto a network drive. This works well with small files but can start to really struggle when we start to reach about 100-150 pages. Typically a 50 page document will take about a minute from the time it stops scanning the batch to appear in the network drive. Yesterday I had a 700 page document take 4 1/2 hours. And this morning we had a 170 page document take 4 hours (before I deleted it). The Job List shows the scanned documents sitting in the "transferring" status. This makes it sound like a network issue but I don't think it is. If it was it would be a uniform delay depending on the size of the document. The delay we are experiencing is almost exponential. Any ideas? I can only assume it's something to do with the printer memory or software it uses to create pdf's.
Some of the internal fonts of our networked Konica Minolta Bizhub252 printer are not installed on my...
(More)
Some of the internal fonts of our networked Konica Minolta Bizhub252 printer are not installed on my computer. How do I get to use thes fonts?