Question about GE Microwave Ovens
...circuit breaker with no change. Thanks! Mark E. Lewandowski try removing the touch pad/switch membrane and cleaning connections on ribbon cables. if problem still exists replace switch membrane. ...
Question about Microwave Ovens
...pad membrane on a Kenmore Microwave Model # 721.80049700? I& I've got a badly scratched touchpad membrance from abrasive sponge - lesson learned the hard way. Anyways, how do I replace the ...
...pad is not working. Okay, thank you for that. You have a failed membrane keypad, but on this model, it is not available separately. You would need to order the control panel assembly, part # ...
pad, so can it be fixed. Can I fix it myself? Yes, it's probably a failing membrane keypad.Since you didn't mention the model number, I have to be kind of general. On some models, the membrane
...pad on the microwave lights up, but will not respond when any of the keys are touched. The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set ...
removing the backcover of this unit. if the ribbons are in good condition, i recommend replacing the touch pad membrane. Replace touchpad , or protective film between touchpad and control board. Enter
...pad. Is this just a membrane problem? Yes, you have a failing membrane keypad. If and when an oven is coming on or doing anything by itself, this is very dangerous and can result in a fire. So until ...
...pad on the membrane keypad. The other pads on the keypad are fully exposed once you open the door and you just press them directly to operate them. These plastic button assemblies have been upgraded ...
pad nothing happens. You have a failed membrane keypad. It's not uncommon for it to be intermittent or partially operable. On these models, the membrane keypad is not available as a separate part,
...membrane carbon tracks. other wise it can be moisture build up or even a connector fault of the key pad. You can try and remove the pad and PCB and use a hair dryer to warm the pads and the pcb. if ...
21 questions posted
Usually answered in minutes!
216 Questions
111 Questions
92 Questions
78 Questions
76 Questions