Question about Whirlpool duet Washing Machines
...shut? The door must be completely closed for the washer to operate. The door may look closed, but may not be latched. Open the door and close firmly. Are the shipping bolts removed? All four shipping ...
...shut? The door must be completely closed for the washer to operate. The door may look closed, but may not be latched. Open the door and close firmly. Are the shipping bolts removed? All four shipping ...
shut, but start button does not do anything? these things can be confusing! you may have it set on 'delayed start' or 'soak'- check the other indicator lights! 'soak' would fill and pause for a while,
Question about Whirlpool duet Washing Machines
...If not try unplugging it and see if it resets to allow you to start cycle again. i also had this problem, i switched the machine setting to drain, then it cancelled the delay, and i was able to ...
Question about Hotpoint Washing Machines
...Delay Start LED flashing intermittently represent? Once a wash cycle completes its draining, the machine tries to spin but stops and Door lock LED flashes rapidly whilst Delay Start LED flashes ...
...selected a program? Is water available? You haven't selected delay? Then I suspect it may be a faulty door sensor, it wont start if it thinks the door is not shut. Try opening and reshutting the
Question about Washing Machines
...its pretty hard to determine what the 1h and 3 h mean unless its actually for the delay start?? The machine is waiting for you to shut the lid and press what delay you want to start the
...delay button. I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power and start any cycle. I ask that you ...
Question about Whirlpool Washing Machines
delay start pushed? 2) the door latch cannot energize and catch the keeper this is a limit switch telling the computer (on board controller) that the door is not yet shut. Worst case try 1 slam of the
Question about Kenmore Washing Machines
...delay prior to filling, where the electronic control is checking the dispenser function. This is Normal.Flashing Lights or Error Code on DisplayWhen there is a filling issue, the washer may shut off ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions