Whirlpool Duet GHW9150P Front Load Washer "older control locked" Questions

Ad

Question about Whirlpool duet Washing Machines

1 Answer

...control lights work, but console just beeps when I press and hold the hold to start button. Does the blown light bulb have anything to do with this? this is almost always a bad door lock switch. try ...

Ad

Question about Whirlpool duet Washing Machines

1 Answer

...control console off starting at dispenser side. On older non teardrop front disconnect and remove interface cables from ccu at rear (ribbon cable in clips on right side. On new teardrop models remove ...

Ad

Question about Whirlpool duet Washing Machines

1 Answer

...Control Unit (CCU). This is the main computer for the washer. In many cases, this is all that is required to corrected momentary glitches. If the problem reoccurs, your next step would be to inspect ...

Question about Whirlpool duet Washing Machines

2 Answers

...older Frigidaire front loader, and I recently had the same problem, and I had no problem resolving it, and have not had the problem since. I have occasionally had water in the tub after a period of ...

Question about Whirlpool duet Washing Machines

6 Answers

...older post but new people read them every day. Just because it is on the internet does not mean it is the correct information. Most appliances come with a Tech Sheet that is available to paid ...

Question about Whirlpool duet Washing Machines

1 Answer

...older design) over time, which causes the electrical resistance to drop to such a value that the small Q6 triac located on the upper control board overheats and shorts out internally. The triac is ...

Question about Whirlpool duet Washing Machines

1 Answer

control board for the older Neptunes. If the motor is not running at all, check that the main control board is sending power to the motor control board. If it is you need the motor/ motor control kit

Question about Washing Machines

1 Answer

...OLDER F/H--No water detected entering machine or Pressure switch trip not detectedF/02--Long DrainF/05--Water Temperature Sensor ErrorF/06--Drive Motor Tachometer ErrorF/07--Motor Control Unit ...

Question about Whirlpool duet Washing Machines

1 Answer

older models had an issue with the main control boards loosing connection at the soldered joints for the door switch. They would loose solder, and the board would think the fault was the door lock and

Question about Whirlpool duet Washing Machines

2 Answers

...control board failure from happening. Please tell everyone you know about this important fact. The older Neptune's also have a couple additional issues such as the moldy door boot and the reliability ...

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

11,378 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...