Whirlpool Duet GHW9150P Front Load Washer "align door washing machine" Questions

washer leaks during spin cycle. my daughter pulled the drum out of alignment temporarily while pulling a comforter out of the washer. the door seal is intact although there is a wire ring that came ...

Bosch Exxcel F26error -F26 is door lock code-you may have something stuck in there-an alignment issue or the switch is gone bad-hope this helped-cheers Denny

...washing machine door will not close. It is lined up, but will not stay closed. The door closes but does not click in the locking mechanism. How do I adjust the door lock on the washer? The lock/latch ...

...about 1/4 inch or until a click is heard, worked great. I think my door is still slightly out of alignment (hanging a little low) causing the locking pin to drag and hang up. Thanks for your ...

...Align the new bellows to the outer tub. Attach and tighten the inner clamp (be careful not to over tighten and periodically check the bellows and clamp placement as you're tightening to make sure it ...

...I would mention them just in case. NOTE: When installing the bellow make sure you ensure the alignment mark (arrow) is in the 12 o'clock position when placing the bellow on the front of the ...

...door boot with guide marks to ensure you align it correctly. Once you have the boot in place, tighten the clamp enough to where it is snug. DO NOT over-tighten or you may damage the tub and or clamp. ...

...door gasget and small amount of water is leaking. Can I replace this myself or do I need a repairman? These arent terribly difficult with mechanical capabilities. The clamp which snugs the bellow to ...

...man. He removed the front cover just under the door. There are shocks under the barrel that keep it aligned. One of mine was damaged and the barrel became misaligned. Check that area, that might be ...