Fahrenheat Electric Convector Baseboard Heater, 3' "hot enough" Questions

...hot enough the gas valve will open and the burners will light.When the igniter starts to go bad it will glow but not get hot enough to open the gas valve.If your furnace lights and ...

...ignition component is not hot enough to sustain a hot enough temperature to keep the fuel burning some have a spark ignition some have a hot surface ignition,try replacing it and it should work

...it wont get hot enough to heat the inside cab. IT WILL GET WARM BUT NOT HOT.I PUT A NEW THERMOSTAT STILL NOT HOT JUST WARM. try replacing the thermostat again....iv had too many "new" ones not

...hot enough to ignite fuel? if the spark plug is sparking it is hot enough to lite the fuel.is ther dirt in fuel tank???is there water in the fuel???? what is the air pressure set at????is the nozzle ...

...hot enough after thermostat replacement I have this old oil filled radiator for many years. It used to be very hot. After thermostat broke I replaced it with a new one. Now radiator works fine but it ...

The hot water is not getting hot enough Time to run some vinigar thru the unit to descale it. Contact Rinnai for details. 800-621-9419.

why does the heater smell and not get hot enough? The smell is dirt or dust on heating element. If not hot enough it is because the thermostat may be prematurely shutting down.

its not keeping 3/4" to 1" of the end of the thermocouple red hot, it may not be large enough to get the t-couple hot enough to generate the output that's required to make the heater work consistently

...long enough to heat Fan maybe running to slow and allowing the elements to get too hot and open circuiting the cut out. This will be a fault with the fan or maybe dust and debris in the intake

...off it will not re light. This sounds like a bad thermostat. Myself I run them wide open and unplug it if it gets to hot.You can replace it or follow my lead and just unplug it when it is hot