Question about Princeton Digital Computers & Internet
...DVI input. VGA input Ok. In VGA Mode the monitor goes into power saving mode as set under display properties. Using the monitor with the DVI input, it cycles in and out of power saving mode in 1 ...
monitor would stay in power save if the input other than the one you are using is selected. I believe the default input is DVI. Are you using VGA? In the menu, under advanced, you can select the input
Question about LG Computers & Internet
DVI cable to hook into your computer, try to switch your display screen to "digital" input mode if possible. Many auto detect the signal, but it almost seems as if yours either is not, or there may be
...input select button to DVI If you are Connected VGA, make sure the system doesn't have 2 VGA ports. If it does, connect to the other port. i had the same problem with the same screen as you. i ...
Question about Princeton Digital Computers & Internet
...DVI plug (wider one, with flat pins in 2 rows)? From what you write, your monitor is switched to the analog input (VGA). It doesn't sense any signal on that input and hence goes to power down mode. ...
...cable, and try to set the display input manually, (if u user a D-SUB cable, set it to analog/D-SUB, if u use a DVI cable set it to digital/DVI). Try this and keep in touch with me. Best Wishes ...
Question about Princeton Digital Computers & Internet
...DVI, goes to Power Save mode and no display. It works fine with VGA input. It had been working fine for ~2 years. Update Bios & Video Driver Also right click on my computer,go to properties,go ...
...DVI cable(Digital input) else the VGA would be the only option available. If the cable seems to be plugged at the right place, press the first button from the left on the front panel of your monitor ...
...input selector on the front of the monitor have you pressed that? Also try using a DVI cable to connect to the monitor and vid card (if you can). Take the video card out and reseat it. After that i ...
Question about Princeton Digital Computers & Internet
...input source. Your monitor has probably been set inadvertently to receive a DVI signal while it's connected via a VGA cable, or vice versa. Other than that, check your connections. Remove the cables ...
67 questions posted
Usually answered in minutes!
82 Questions
59 Questions
32 Questions
27 Questions
23 Questions