Question about LG Flatron L1951S-SN 19" LCD Flat Panel Monitor

2 Answers

Analog power save mode

I just bought a new desktop and monitor. The monitor i chose was the 22" Flatron LG. I hooked everything up, and when i boot up the computer, the monitor pops on for a second then says "Analaog power save mode" in a blue box then it goes to sleep. Any perticular reason why this may be occuring?

Posted by coregamer402 on

  • dmalkoske Jul 06, 2008

    montor has power because we get a small window saying annalog power safe mode then it disappears and we have a black monitor and no where to go from there

  • Anonymous Mar 11, 2009

    I bought an LG FLATRON W2252TQ to view photographs. I am having a terrible time adjusting the color and the factory default settings make the faces in the pictures very red with bright highlights. Is there an adjustment to be made or is the monitor a lemon?

×

Ad

2 Answers

Anonymous

I had the same problem with the same screen as you.
i connected the usual blue plug on my pc, and i got the same message as you did.
i finally realised that i connected it on the on-board graphics card(VGA?)
i added a new plug(adaptor) and then connected it on my graphics card.
everything works now!

It's just tha we are all used to the shape/colour of the port on our PCs

Posted on Oct 10, 2008

Ad

IQUIT

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,940 Answers

Are you connect via Analog (Blue VGA connection) or DVI (White Digital connection?

If you are connected via DVI, then you have to change the input select button to DVI

If you are Connected VGA, make sure the system doesn't have 2 VGA ports. If it does, connect to the other port.

Posted on Jul 06, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Not able to use full screen


Hello,
This sounds like bad resolution is set on your computer. The LG 22" FLATRON monitor has a native resolution of 1680 x 1050. However, your video card may not support this so you can also try any other 16:10 resolution like 1440 x 900.

To change your resolution in Windows XP:
1. Access the Control Panel.
2. Choose "Display".
3. Click the "Settings" tab.
4. Under "Screen resolution" move the slider to a 16:10 resolution like 1680 x 1050 or 1440 x 900.

If you computer does not support higher resolutions, you may consider replacing your video card to take full advantage of your nice 22" Flatron monitor.

If I can further assist you, please let me know.

Regards,
KYTechnology

Mar 01, 2011 | LG 22" FLATRON LCD Monitor

1 Answer

I have a LG Flatron W2242p monitor. What should I set the screen resolution setting to?


1680 x 1050 is the highest resolution that this monitor can support.

Go through my published guide entitled How to set your Desktop Screen Resolution?

Set your Resolution to 1680 x 1050 as this will give you the sharpest image.

Thanks
damnor01

Jan 08, 2011 | LG Flatron W2242P-SF 22" Monitor

1 Answer

Problem for LG 22" FLATRON Widescreen LCD Monitor LCD Monitor My monitor says analog power save and shuts off. Day before Yesterday I bought a new computer. I got the above mention problem on by...


The monitor is going itself to the Power Saver mode.It is not a problem of the monitor.This happens when there is no signal on the monitor.The monitor will display properly when there is an output signal on it.Please connect it to the computer and check that the output signals from the motherboard are proper.Also check both DVI (Digital Visual Interface) and VGA (Video Graphics Array)cables on the monitor.

Feb 23, 2010 | LG 22" FLATRON LCD Monitor

2 Answers

Lg flatron w1952tq goes into power saving mode on boot computer works fine on other monitor. Running Kubuntu linux.


your LG monitor is bad then if you put another monitor on the computer and your getting video. Just as a last resort, you might want to put the LG monitor on another computer and if it stays in sleep mode then you know for sure at that point, the monitor is bad.

Feb 06, 2010 | LG 22" FLATRON LCD Monitor

1 Answer

Brand New LG Computer Monitor Flickers/Goes Into Power Save Mode


well right click on your desktop and goto properties and then goto screen saver and then goto power and then on the monitor setting goto never.

Sep 20, 2009 | LG Flatron L2320A 23" LCD Monitor

2 Answers

Weird colors!


Normally this happens if the plug at the back of of the monitor or the computer loose. Try to secure that cable. If they are secure, check the pins on the ports at back of the monitor / desktop or the cable. I also suggest that you try a different monitor cable.

Jun 17, 2009 | LG 22" FLATRON LCD Monitor

1 Answer

Monitor configuration


Did you also install the LG software and LG Drivers correctly?
With my LG flatron i received a piece of software to optimize my settings and even calibrate the monitor. I run win XP ME.

Jul 04, 2008 | LG 22" Widescreen Flat Panel LCD Monitor

Not finding what you are looking for?
LG Flatron L1951S-SN 19" LCD Flat Panel Monitor Logo

529 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a LG Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...