Question about Brother HL Office Equipment & Supplies
...ready button (blue) will not stay on. Does this mean that when the printer is out of toner it just stops altogether? thanks Heathr when the toner light is on this means the toner cartridge is empty ...
Question about Brother HL Office Equipment & Supplies
...ready light won't turn on when the blue "go" button is pressed. Is there a reset somewhere or a fuse? the problem coming from the LVPS or Main board pcb . may need to be replace both of it.need to ...
Question about Brother HL Office Equipment & Supplies
...blue leavers next to the inner walls, then pushed them back up into their original position, and then closed the back cover did the machine cycle back into ready mode with the Status light green. The ...
Question about Brother HL Office Equipment & Supplies
blue tab. Slide it back and forth a couple of times to clean a corona wire and see if that helps.If the problem still exists, you may try this 2nd option. > the front door. There is something wrong
...ready" and "alarm" light are blinking simultaneously, and I get a printer Paused message on my computer. I just replaced the toner cartridge but nothing happens. What should I do? ...
...blue power button down but that did not work. Please help. This indicates a Service Call Error. Turn printer OFF, wait a few seconds and then the printer ON. If the alarm continues, perform a factory ...
...blue slide lever on the right side for cleaning the corona wire. Move the lever back and forth, left and right, about 30 times. Reset lever to far right side with arrows lining up. Set the drum and ...
...until ALL the lights are on. Then release the stud and close the front hatch. and you have replaced the drum and reset the drum page count. The machine should then have only the blue ready light ...
...ready to replace the drum). Push the toner cartridge into the new drum until it locks into place; the blue lever should lift automatically. Put the assembly back in the printer. Clean the printer as ...
...ready and I hear a flipping sound and the light goes back to alarm abd does not print Pull the drum out the front door, remove the toner cartridge and check for any paper and remove it. Make sure ...
488 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
249 Questions
188 Questions