Question about Brother MFC Office Equipment & Supplies
tight in the feed tray. The paper length tab on the end away from the feed roller is too tight. If you cant rotate the gear on the paper tray and lift the paper, it's too tight for the machine to lift
Question about Brother MFC Office Equipment & Supplies
...paper to tray. The tray is full of paper. I've turned it off and back on, cleaned it and changed the paper. What's wrong with it? Gears on the tray is broken, or the gears that lift the tray. (thus ...
...paper tray are not holding the paper too tight against the front of the tray, there should be about 1/16 inch play so that the paper can be lifted to the roller easily. Also take out your toner and ...
paper tray problem - full of paper but can't pull up paper and display says tray empty also loud clicking noise coming from paper tray hopefully we can stop problem before it gets worse, take paper ...
Question about Brother MFC Office Equipment & Supplies
...paper tray was locked in the correct position and trying to print, I noticed that the printer itself had pulled out the paper tray so the back was not flush. After looking at the paper tray to see ...
Question about Brother MFC Office Equipment & Supplies
...paper in tray The paper is not feeding from the paper tray. The loud click is alarming, but not the problem. Check the adjustments in the paper tray. The left and right guides should be snug, but the ...
Question about Brother MFC Office Equipment & Supplies
paper tray. The problem is that the paper gets jammed when it feeds the paper and it will sound clicking because the printer cannot pick up the paper at the tray. What you will do is to put bond paper
Question about Brother MFC Office Equipment & Supplies
...paper tray underneath the printer. Whenever I try to print something it makes this horrible clicking noise and sounds like it is going to break. I did notice that the paper tray is not moving itself ...
Question about Brother MFC Office Equipment & Supplies
...paper feeder Most noises that are a clicking type is caused by the tray not in position correctly, make sure the tray is free to lift and or is pushed in all the way. Broken fuser gear can also ...
Question about Brother MFC Office Equipment & Supplies
the tray -- nearest you). One is underneath the paper and the other is in the front, center. I then made sure that, when I move the biggest gear (the one that isn't round) that the paper moves upwards
843 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
406 Questions
381 Questions