...Open the jam clear cover. Pull the jammed paper out of the fuser unit. 7. Close the jam clear cover. Close the face-up output tray. If the paper jam still cannot be cleared, for HL-5130 and HL-5140 ...
...Jam with no access to clear the paper is jammed in the back roller, inside the fuser cover. However, I cannot access the paper, as it's all scrunched against this roller. I'm searching for a way to ...
...jam in rear Hi Linda, 1.Open the front cover. 2.Pull out the drum unit and toner cartridge assembly. 3.Open the back cover. 4.Pull the tab toward you to open the rear chute cover. 5.Pull the jammed ...
...open and close. when there is a paper jam and not all of the paper is removed fragments of the removed paper can be left behind. this can actually trigger an error of door open/close cover. The ...
Question about Brother MFC Office Equipment & Supplies
...jam out backwards, they might stab through the paper, snag, and get pulled out so they don't swivel of line up correctly anymore. Open the door in the back to see that one. Make sure both push down ...
...jam open top scanner, open inner cover where printed paper normally comes out. push left and right locks on the fuser and the fuser will come out. remove jammed paper. put back together in revers ...
Question about Brother MFC Office Equipment & Supplies
...open Close the fuser cover located behind the back cover of the printer. Paper jam Clear the paper jam. See Paper jams and how to clear them on page 85. If the printer does not start printing, press ...
Question about Office Equipment & Supplies
jam and to open the front cover, but there's no jam. I remove the paper tray, open the front cover, it resets and the same thing happens again. This printer has a straight flow through path. * Situate
Question about Brother MFC Office Equipment & Supplies
...jam & back cover open fault The printer feeds paper and then stops with the paper 1/3 the way into the fuser. A fault "back cover open" appears. To clear you have to remove the drum / toner ...
Open the jam clear cover. Pull the jammed paper out of the fuser unit. Close the jam clear cover. Close the face-up output tray. If the paper jam still cannot be cleared, for HL-5130 and HL-5140 users
843 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
406 Questions
381 Questions