Hotpoint Aquarius WD63 Front Load Washer/Dryer "start button work wd640" Questions

...any ideas? trn main dial to empty drum icon press start/cancel button and on/off button together then switch off at mains and leave for 10 mins got this info off hotpoint themselves and it works for ...

...button to start your wash programme the LCD shows "test". You must then press the "Start/Cancel" button which will give you the normal temperature and washing time and then importantly you must ...

...Start/Cancel button until message clearsNow press both Start/Cancel and On/Off buttons together until you get a dOFF messagenow your machine should work OK cancel program on hotpoint aquarius ...

...put the appliance into a test/demo mode. to cancel it you just need to push the on/off and start buttons at the same time and "d off" should be displayed on the screen and it should now work as ...

button. I have tried to start a cycle of washing or drying to get out of the loop, it did not help. Any ideas? For mine, it started flashing the on/off light along with the "drying high heat" and the

...work, I even pressed for few seconds the start/cancel as I was told couple of months ago and this method didnt work either, its stuck on prewash even if I change the dial. it's not on 'test' is it, ...

...Thank you not heard of le5e, could it be 'test'? try turnig the machine on while pressing the start and on buttons at the same time untill dOff

... Now press the on/off button and the start button at the same time and hold them down for a few seconds until the display shows d-end or d-off. Your machine should now work. hope it helps regards ...

I have a Hotpoint WD640 Aquarius 1400 and although the on/off button is lit, the start button won't work.Any help in diagnosing problem is appreciated! checj door latch

...bought a recondition control panel and its still not working can anyone help ??? Check the carbon brushes of the motor. And then press the button start for about 5 sec. until all leds lights